Home > Products > Communication Module > Cisco SFP-10g-Bx80d Compatible 10gbase-Bx80-D Bidi SFP+ 1330nm-Tx/1270nm-Rx 80km Dom Transceiver Module
Cisco SFP-10g-Bx80d Compatible 10gbase-Bx80-D Bidi SFP+ 1330nm-Tx/1270nm-Rx 80km Dom Transceiver Module
10Gbps BIDI XFP 10KM/20KM/40KM/60KM/ 80KM Transceiver / ModuleProduct Features Hot-pluggable XFP footprint Supports 9.95Gb/s to 11.3Gb/s bit ratesXFI Loopback ModeRoHS-6 Compliant (lead-free)1270nm DFB laser and PIN receiver for LASX-T2733X-ER1330nm DFB laser and PIN receiver for LASX-T3327X-ERPower......
Send Inquiry
Product Description
10Gbps BIDI XFP 10KM/20KM/40KM/60KM/ 80KM Transceiver / Module
Product Features
- Hot-pluggable XFP footprint
- Supports 9.95Gb/s to 11.3Gb/s bit rates
- XFI Loopback Mode
- RoHS-6 Compliant (lead-free)
- 1270nm DFB laser and PIN receiver for LASX-T2733X-ER
- 1330nm DFB laser and PIN receiver for LASX-T3327X-ER
- Power dissipation<2W
- Case operating temperature 0 ºC~70ºC
- Up to 40km transmission on SMF
- 2-wire interface with integrated Digital Diagnostic monitoring
- EEPROM with Serial ID Functionality
- Compliant with XFP MSA with LC connector
Applications
- 10GBASE-BX 10.3125Gb/s Ethernet
- 10GBASE-BX 9.953Gb/s Ethernet
- SONET OC-192 &SDH STM I-64.1
Product Description
LASX-T2733(3327) X-ER is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 11.3Gb/s, it designed to be compliant with XFP MSA. The module data link up to 40km in 9/125um single mode fiber.
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Storage Temperature | Ts | -40 | - | 85 | ºC | |
| Relative Humidity | RH | 5 | - | 95 | % | |
| Power Supply Voltage | VCC | -0.3 | - | 4 | V | |
| Signal Input Voltage | VCC | Vcc-0.3 | - | Vcc+0.3 | V |
Recommended Operating Conditions
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Case Operating Temperature | Tcase | 0 | - | 70 | ºC | Without air flow |
| Power Supply Voltage | VCC | 3.14 | 3.3 | 3.47 | V | |
| Power Supply Current | ICC | - | - | 600 | mA | |
| Data Rate | BR | 9.95 | 10.3125 | 11.3 | Gbps | |
| Transmission Distance | TD | 2 | - | 40 | km | |
| Coupled fiber | Single mode fiber | |||||
Optical Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Transmitter | ||||||
| Average Launched Power | Pout | 0 | - | 5 | dBm | |
| Average Launch power of OFF transmitter | POFF | - | - | -30 | dBm | Note (1) |
| Centre Wavelength Range | λC | 1260 | 1270 | 1280 | nm | LASX-T2733X-ER |
| 1320 | 1330 | 1340 | nm | LASX-T3327X-ER | ||
| Side mode suppression ratio | SMSR | 30 | - | - | dB | |
| Spectrum Bandwidth(-20dB) | σ | - | - | 1 | nm | |
| Extinction Ratio | ER | 3.5 | - | dB | Note (2) | |
| Output Eye Mask | Compliant with IEEE 802.3ae requirements | Note (2) | ||||
| Receiver | ||||||
| Input Optical Wavelength | λIN | 1320 | 1330 | 1340 | nm | LASX-T3327X-ER |
| 1260 | 1270 | 1280 | nm | LASX-T2733X-ER | ||
| Receiver Sensitivity in average | Psen | - | - | -15 | dBm | Note (3) |
| Input Saturation Power (Overload) | PSAT | 0.5 | - | - | dBm | Note (3) |
| LOS -Assert Power | PA | -32 | - | - | dBm | |
| LOS -Deassert Power | PD | - | - | -18 | dBm | |
| LOS -Hysteresis | PHys | 0.5 | - | 4 | dB | |
Related Category
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
