TCP/IP and RS485 DIN Rail RS485 to Ethernet Converters St-TCP-Dr312

Product Description

ST-TCP-DR312

Din Rail RS485 to Ethernet Converters | Compact Ethernet Serial Servers

Din Rail RS485 to Ethernet Converters ST-TCP-DR312 can transmit data transparently between TCP/IP and RS485, which are widespread required in industrial automation. ST-TCP-DR312 is a Din Rail RS485 to Ethernet Converter, which can transmit data transparently between TCP/IP and RS485. Via web-page or software, rs485 to Ethernet Converter can realize serial data and TCP/IP data package transparent transmission.

1-Simple configuration and easy to use
2-Compact, Light Weight
3-Supports TCP server/client, UDP server/client, Virtual COM
4-RS485 Port, Industrial Grade
5-Standard DIN-rail mounting
6-Modbus RTU to Modbus TCP
7-single RS485 to ethernet converters,RS485 to tcp ip is widespread required in industrial automation.

Technical parameters

Description	Parameter	Value
Hardware	Work Voltage	DC 5.0~36.0 V
	Work Current	130mA@5V
	Ethernet Port	RJ45,10/100Mbps
	Serial Port Baud rate	600-460.8K(bps)
	Serial Port	RS485*1
Software	Network Protocol	TCP/IP, UDP, ARP,ICMP,IPV4
	IP Type	Static IP,DHCP
	DNS	Support
	Configuration	Software, Web-page, AT command
	Work Mode	TCP Server/TCP Client/ UDP Server/UDP Client Modbus RTU to TCP
	Similar RFC2217	Support
	httpsd Client	Support
	TCP Server Connection	Support to connect max 8 TCP client
	Network Caching	Send: 6Kbyte, Receive:4Kbyte
	Serial Port Caching	Receive:2Kbyte
	Average Transmission Delay	<10ms
	Software	VCOM, USRIOT_Cloud, Setup software, test proforma
	Packaging Mechanism	4 bytes package time 1024 bytes package length
Others	Certificate	CE, RoHs,FCC
	Grade	IP30, 1.5KV
	Size	71.0x60.0x25.0mm
	Work Temp	-40~85c
	Storage Temp	-40~105c
	Work Humidity	5%~95% RH
	Storage Temp	5%~95% RH

Basic Function of Din Rail RS232 to Ethernet Converter ST-TCP-DR312

Realize bidirectional transparent transmission between RS232 and Ethernet

TCP/IP and RS485 DIN Rail RS485 to Ethernet Converters St-TCP-Dr312

DIN-rail mounted RS232 to Ethernet Converter ST-TCP-DR312

Small size, easy to manage and maintain, cost-effective

TCP/IP and RS485 DIN Rail RS485 to Ethernet Converters St-TCP-Dr312

Work mode

TCP CLIENT

Serial to Ethernet converter ST-TCP-DR312 will initiate TCP connection to the destination IP address that configured by the user and serial to Ethernet converter will continuously try to reconnect if establishing TCP connection unsuccessfully.

TCP/IP and RS485 DIN Rail RS485 to Ethernet Converters St-TCP-Dr312

TCP SERVER

Serial to Ethernet converter ST-TCP-DR312 monitors the set port and waits for a TCP client connection. Data from the serial device will transmit to all successfully-connected via serial to Ethernet converter.

TCP/IP and RS485 DIN Rail RS485 to Ethernet Converters St-TCP-Dr312

UDP CLIENT

ST-TCP-DR312 only communicates with the target interface of the target IP, thus to assure the accuracy of data transmission.
TCP/IP and RS485 DIN Rail RS485 to Ethernet Converters St-TCP-Dr312

UDP server

ST-TCP-DR312 can transmit the data automatically to the last time transferred device after receiving the data, which is suitable for multi-network devices that need to communicate with the ST-TCP-DR312.

TCP/IP and RS485 DIN Rail RS485 to Ethernet Converters St-TCP-Dr312